A Fieldpiece multimeter is an electrical device that measures voltage, frequency, temperature, current, capacitance, resistance, and continuity.
A multimeter device is designed for different purposes in an HVAC system. It is used to check out everything that utilizes the electric current, like batteries, wires, switches, and outlets.
Rey Harju established the Fieldpiece multimeter in 1990 for Field Service professionals. It is a stick-like instrument with different parts containing Velcro straps, Protective Padded Case, Test Leads Kit, Type K, Thermocouples, Wireless RMS Clamp Meter, Alligator Clips, and Alkaline Battery. So these parts of an ideal Fieldpiece multimeter help give the technicians reliable and accurate results.
How to use a Fieldpiece multimeter?
Fieldpiece multimeters have so many uses along with their types. Usually, there are two types of Fieldpiece multimeters.
- Fieldpiece SC260
- Fieldpiece HS36
Fieldpiece multimeters are used for Electrical Testing, measuring temperature, Non-Contact Voltage ( NCV), performing a continuity test, and testing the differences between the voltages. But for these, you must first know how to use the Fieldpiece multimeter.
- You will now use the Fieldpiece multimeter, so you should know the main parts you must work with while using this instrument.
- A Fieldpiece multimeter contains two leads: black and red, and there are three ports available for them.
- Now the thing you should know is the exact point of attachment of both these leads.
- The black lead will go in the COM port, and the red lead will go in the other two remaining ports depending upon the purpose for which you are setting this multimeter.
- Before starting the procedure, you should know the voltage capacity of the multimeter you are using because if the tested voltage exceeds the limit, your multimeter will not be able to work anymore.
- You will get two options about how you want to use the multimeter.
- For instance, if you want to test the DC, you must select the DC option by rotating the central knob towards the option.
- Now all is set, and you have to put the leads in the respective knobs, and you will get the readings right in front of you on the digital screen of the Fieldpiece multimeter.
How to Use Fieldpiece multimeter For Electrical Testing
- There are the test leads attached to the Fieldpiece multimeter.
- You have to attach these test leads with the jacks.
- Make sure you attach both leads correctly.
- Connect the Red lead to the “+” jack and the other black lead to the “COM” Jack.
- Now you have to test the DC Voltage, so set the dial of the Fieldpiece multimeter on the VDC mode.
- Carefully touch the probes to get the readings from the test terminal.
- Now you will get the readings on the digital screen of the Fieldpiece multimeter, which you can note down.
Features of Fieldpiece multimeters:
- Fieldpiece multimeters have a small LED light which is an indicator for higher voltages.
- It will brighten up, and you will listen to the sound of a beep whenever the measuring voltage exceeds the limit from 16VAC/35VDC.
- It helps save your fieldpiece multimeter from getting ruined by excessive voltage.
- An Auto- power feature is available in this multimeter called APO. It switches off the meter after 30 minutes of inactivity, which helps in power saving.
Precautions while using a Fieldpiece multimeter:
- It would be best if you disconnected the test leads of the Fieldpiece multimeter before opening the casing.
- It is favorable to perform one-hand testing on this multimeter tool.
- While taking readings, you should not touch the exposed parts of the fieldpiece multimeter, like fixtures, metal pipes, outlets, and other parts.
- There are finger protections available on the probes, so while taking the measurements, don’t move your fingertips from those finger protections.
- Check out the condition of the test leads. If there is any damaged one, then replace it. You should not insert any of the damaged test lead in the pots.
- Don’t use this multimeter tool during storms.
- If you change the battery of the fieldpiece multimeter, remember to put the dial of the tool upon the off settings.
Final Verdict
A Fieldpiece multimeter is the only HVAC system runner’s choice when measuring current, resistance, and any matter related to the electric current in any sense.
The HVAC and electrical industries have great uses for this multimeter tool. This is a device with a broad range of uses. Even beginners find it convenient enough. Any professional HVAC is quick to get this tool.
FAQs
What is the continuity LED in the Fieldpiece multimeter?
It is an LED on the multimeter’s right side. It will glow up and make a beep sound whenever you test continuity.
What happens if the voltage measure exceeds the limit?
If the voltage measurement exceeds the limit, it permanently damages your Fieldpiece multimeter.
What is the Non-contact voltage LED used for?
If it glows up and gives a beep sound, then it means that you are using the Non-contact voltage measuring feature of the Fieldpiece multimeter.
How much does the Fieldpiece multimeter cost?
There are different prices for a Fieldpiece multimeter at different sites, but it costs up to 136 dollars most of the time.
Related Guides:
