How to Treat a Burn from a Soldering Iron

How to Treat a Burn from a Soldering Iron

If your skin gets burnt through soldering iron or anything else, don’t worry about it because sometimes minor negligence can cause this abrasion. It’s a normal thing in daily routine. Here I’m going to tell you how to treat a burn with a soldering iron. So, don’t worry about your pain. I can understand how much your skin is suffering. Soldering iron can convert metal into liquid form. Its temperature is 200°C.

But the focus point is the burn; you get which degree? First-degree and second-degree burns can treat at home quickly. But third-degree burn is dangerous. You have to go to the hospital for a third-degree burn. Here you can identify your burn type.

First-degree burn

First-degree burns can be checked by size and intensity. The burnt area is approximately one inch, and the skin gets red and weak waves of pain. It is a first-degree burn.

Second-degree burn

The intensity of the burn can tell us about the burn. Your burn area is 3 inches wide. Your skin converts into brown burning flakes, or you get blisters on your skin, second-degree burns because soldering iron has high temperature—this can be curable at home.

Third-degree burn

Suppose your skin gets burned by soldering iron. The burnt area is large, and the soldering iron also burns the skin deeply. Like, cells and veins are ruptured due to steam. So, this is a third-degree burn. It is not curable at home. You have to go to the doctor immediately.

Steps to treat a burn from a soldering iron

  • Apply water to it
  • Use ointment
  • Cover with gauze

Rinse waterRinse water on burn hand

Everything that gets hurts by burn or fire naturally man goes for water. So, nature tells us about the cure for burning. This was the initial step for safety measures.

Water is the only thing that gives immediate aid to burn. After that, we will go for successive treatments at home.

Water is the priority after the burn. But you can apply a cold, damp cloth for 6 minutes—it helps to decrease the burn sensation on the skin.

Compress the hard, wet material on the burn. But avoid it if that hurt more. Never hurt yourself during the cure. When sensations get normal, remove the damp cold cloth and allow it to dry.

Use antibacterial ointmentUse antibacterial ointment on finger

Your burn gets cool. Apply antibacterial ointment on it that provides relief to your skin. It also prevents pain and avoids any infection of the skin. Antibacterial cream is a must to use. You cannot control this.

You can use over-the-counter medicines (OTC) without a doctor’s prescription. Take it only when you get first or second-degree burns. For third-degree burns, you have to go to the doctor.

Best OTC ointment for burn

You can apply these ointments on burning:

  1. Polysporin
  2. Neosporin
  3. Bacitracin

For pain relief you can use ibuprofen, neproxen or acetaminophen. These are easy to carry and buy.

Cover with gauzeburn finger cover with gauze

applying gauze is a good portion for you.

Gauze provides coverage of your burn. It prevents germs in the open air and is safe from infection. Sunburn is also pretty susceptible.

Don’t try to use cotton on the skin because that sticks and causes waves of pain.

 Safety measures for using a soldering iron

  • Don’t check the nib with your hand.
  • Use tweezers and clamps to hold.
  • Try to wear safety glasses.
  • Refrain from positioning your head in the top direction of the soldering iron.
  • Be gentle to try soldering the iron. Try to wait for 6 to 8 minutes.
  • Its smoke is harmful to health.
  • Never leave the soldering iron ON. When you complete your work, you have to switch OFF it.
  • Wash your hand after using it. It had lead and toxic elements.
  • Before storing it, make sure it is cool.

Can I use toothpaste on it?

Toothpaste can give a coolness effect, but according to burn and reconstructive centers of America (BRCA), toothpaste contains ingredients that are okay for teeth but not for the burn.

Ingredients in toothpaste have different effects on teeth and skin.

  • Sodium fluoride: sodium fluoride is in toothpaste due to teeth cavities. Sodium fluoride destroys membranes and irritates delicate areas like eyes or burnt skin.
  • Glycerol:  glycerol is used in toothpaste for a sweet taste. But it germinates bacteria on the skin.
  • Sorbitol:  usually, sorbitol is used in toothpaste to bind the texture of toothpaste .diabetic patients uses sorbitol as a sweetener. In burn area, sorbitol work as trash material that can cause bacteria.
  • Calcium carbonate: this help to remove plaque. Work as scrubber .it  has no problematic issues for burn wounds.
  • Sodium lauryl sulfate: it creates a lather while brushing. This is harsh for burn areas.

Frequently Asked Questions

How much time does it take to cure?

It takes about 40 minutes to relieve pain, but blisters will take time to disappear .its for first and second-degree burns, not for third-degree burns.

How to aid if no ointment is available right now?

Use aloe vera gel or fresh aloe vera. You can use honey as an alternative to ointment. A potato cube or potato juice is best for the burn.

Coconut oil also helps to cure it coconut; oil help to remove the stain of burn. You’re your skin gets burned, use coconut oil immediately. This creates a layer of protection between the wound and the air. This never leaves the sign of burn. These are the ancient methods to get rid of pain and burns.

Can I cool the soldering iron in water?

No, you cannot put a soldering iron in the water. Water gets into the machine and causes problems when you use it again.


Don’t get panicked about how to treat a burn from soldering iron. Rinse water that gives excellent effect .use ointment to relieve pain and protect from infection. Cover with a loose bandage. So it gets safe from sunburn, air, and external conditions. Use safety measures to keep saving yourself from any hurt.

More Guides:

How to Make a Heating Element For a Soldering Iron

Leave a Reply

Your email address will not be published. Required fields are marked *

About Us

Our team comprises dedicated professional Engineers, researchers, and experienced DIY enthusiasts who completed hundreds of projects in Home improvement, Electricle and Electronics. Read more

Recent Posts

Sign up for our Newsletter